news

Home / News / Industry News / Compressor installation should comply with the regulations

Compressor installation should comply with the regulations

Update:31-07-2017
Summary:

   The installation of the compressor shall be subject […]

   The installation of the compressor shall be subject to the relevant local laws and regulations and shall comply with the following provisions:
1. Compressor should be used load capacity greater than the weight of the lifting equipment for lifting, lifting speed, acceleration should be limited to the scope of the license.
2. Try to install the compressor in a cool, clean, well ventilated place to ensure that the compressor inhaled air clean and moisture content of the smallest.
3. Compressor inhaled air is not allowed to contain combustible gases and corrosive gases, so as not to cause an explosion or internal corrosion.
4. Air-cooled machines should preferably have exhaust fans or ducts to direct hot air to the outside, to avoid heat |
5. Compressor sewage, waste oil emissions should comply with the provisions of the local environmental protection department.
6. This machine uses three-phase AC power supply 380V, 50Hz, guide the compressor power supply line must match its power and install the air switch, fuse and other safety devices, in order to ensure the reliability of electrical equipment, must be reliable grounding.http://www.linsheng.com/