1. Driving on a foggy day. Due to poor visibility on foggy days, not only the double flashing lights should be turned on, but also the fog lights should be turned on to remind the passing vehicles to pay attention and to illuminate themselves.
Spotlight Supplier From China introduces how to use double flash:
1. Driving on a foggy day. Due to poor
visibility on foggy days, not only the double flashing lights should be turned
on, but also the fog lights should be turned on to remind the passing vehicles
to pay attention and to illuminate themselves.
2. When a breakdown occurs on the road or
a traffic accident occurs, the double flashing lights should be turned on to
remind passing vehicles to pay attention to safety. After a vehicle breaks down
or stops in an accident on the expressway, if the lights and warning signs are
not used according to the regulations, 3 points will be scored at a time.
3. When towing a faulty motor vehicle,
both the towing vehicle and the towed vehicle should turn on the hazard warning
flashing lights to remind themselves that the vehicle is in an abnormal state.
4. When temporarily stopping on the road,
turn on the double flashing lights to remind other cars to pay attention.
5. When forming a convoy permitted by the
transaction police department, the vehicles in the convoy should turn on double
flashing lights.
① When the visibility is less than 100
meters, turn on the fog lights, low beam lights, position lights, front and
rear position lights, and hazard warning flashers, the speed shall not exceed
40 kilometers per hour, and the distance between the vehicle ahead and the
vehicle in the same lane shall be more than 50 meters.
②When the visibility is less than 50
meters, turn on the fog lights, low beam lights, position lights, front and
rear position lights, and hazard warning flashers, the speed shall not exceed
20 kilometers per hour, and leave the highway as soon as possible from the
nearest exit.
