Home / News / Industry News / Air Compressor Manufacturers-Portable Air Compressor: Select Specifications, Install

Air Compressor Manufacturers-Portable Air Compressor: Select Specifications, Install


The popularity of air compressors is closely related to […]

The popularity of air compressors is closely related to their application in most power tools. The installation of these devices in a residential garage is relatively easy, but most people do not know how to do it.


Choose the type of air compressor
Before installing the air compressor in the garage, you must first select the appropriate type.


The five important specifications of these devices are:


Cubic feet per minute (cfm)-This determines the amount of air released by the compressor. The equipment's tools will be used to determine the required cfm.

Pounds per square inch (psi)-refers to the pressure of air delivered by the compressor. In order to make the compressor fully meet the user's working needs, the compressor must be higher than the best rating of the given tool set. The average value is 90 psi. The Psi level must be read together with the cfm level.

Horsepower-This is the motor output of the device, which represents the total power. The horsepower of the air compressor is proportional to the psi rating and the cfm rating. Therefore, if the compressor has satisfactory cfm and psi ratings, its power should be ok.


Duty cycle-This refers to the time before the device is shut down for cooling purposes.
Air storage tank volume-the amount of compressed air that a specific type of air compressor can hold. The larger holding capacity can make the motor easier to use in the life cycle. It is also very helpful for projects that often alternate between idle mode and active mode.
Install an air compressor in the garage
After choosing the right air compressor and buying it, you can now install it in the garage.
Here are the compression steps for how to achieve this:


Choose a suitable area so that the compressor can stand correctly.
Determine the amount of space required for tools and work applications.
Choose a connector and hose length that is sufficient for the available accessories.
Place the compressor carefully on top of the isolation pad. This function can reduce noise and vibration, the most important thing is to stabilize the machine. You should read the instruction manual provided at the time of purchase to familiarize yourself with the correct startup procedures and debugging procedures.
The device can now be powered from a closed outlet.
Start your pneumatic tool and start working.

Choose the right hose


If the hose is too long for the working space in the garage, air will be lost between the tool tip and the compressor. 50 feet long hose. For most residential garages, long is usually the ideal choice. This will provide enough length for any system installation, which may extend from your garage space to the backyard, living area or driveway.



It is recommended to install a filter between the fuel tank, the piston and the intake valve. This helps prevent moisture from entering the compressed air. Lubricants and moisture can be a problem, especially for blow molding, painting and sanding applications. Place a filtering device at the exit of the device. It helps prevent condensate from damaging pneumatic applications by diluting the condensate.



The setting of these devices should be connected to the oil / water separator and air dryer. Short-term airlines can be used to link two devices.


The installation of air compressors is a useful task, especially for avid craftsmen. Pneumatic arsenals are best for individuals who use a series of hand tools for metal and wood projects. The compressed air system can even speed up many tasks for those who perform various automatic tasks in the garage.


Linsheng is one of the professional      Air compressor Manufacturers    in China. Our portable air compressor products are suitable for inflating bicycle tires, car tires and sports balls, and inflating ordinary tires within 5 to 6 minutes. This is a built-in pressure gauge with compact and low power consumption features. Has passed ISO9001-2000 international quality management system certification. Has a wealth of production experience and technical foundation. Our goal is to "survive by quality and benefit by time." Good reputation in the international market. Our products have been sold worldwide. Our products have passed "CE, GS, UL and other certifications". We sincerely welcome to cooperate with our factory.