Jump Start Manufacturers introduces the selection metho […]
Jump Start Manufacturers introduces the selection method of fire emergency lights:
1. Qualified information is essential. The type-approval certificate and inspection report of the product should be checked before purchasing. Fire emergency lighting and evacuation indicator lights are type-approved products. The seller must provide the corresponding type-approval certificate and inspection report, which can be found on the China Fire Products Information Network. Qualified fire emergency lighting and evacuation indicator lights are affixed with new ID cards.
2. Consistency inside and outside is important. Qualified products must have a fire product ID card, charging signal lamp, experimental switch button, certificate, date of manufacture, manufacturer name, and related technical parameters on the lamp body. The above content of unqualified products is vague or incomplete. The batteries of fire emergency lighting and evacuation indicator lights are also the main components of individual manufacturers who use shoddy charging and fake batteries. The battery used in the lamp should be marked with the type, voltage, capacity, etc., and should be consistent with the product's inspection report. If there is no such content or does not conform to the inspection report, it is a substandard fire protection product.
3. Simple test to know the difference. Fire emergency lighting and evacuation indicator lights shall be able to be put into an emergency state immediately after a power failure, and the continuous lighting time shall not be less than 90 minutes. Consumers should buy one before purchasing and do a discharge test. If the emergency time is less than 90 minutes, it is an unqualified fire protection product.